Altronix AL400ULM Power Supply

AL400ULM multi-output access control power supply/charger is specifically designed for use with access control systems and accessories. This unit converts a 115VAC / 60Hz input into five (5) individually protected Class 2 Rated power limited 12VDC or 24VDC outputs. Each output will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. These outputs will operate in both Fail-Safe and Fail-Secure modes. Controlled trigger input is achieved through normally open (N.O.) or normally closed (N.C.)supervised input or the polarity reversal from an FACP (Fire Alarm Control Panel). A form "C" dry output relay enables HVAC Shutdown, Elevator Recall or it may be used to trigger auxiliary devices.

• Fire Alarm Panel or Access Control System trigger inputs. [NO] or [NC] supervised trigger input and polarity reversal trigger input (4mA draw from FACP).
• [NO] or [NC] supervised trigger input and polarity reversal trigger input (4mA draw from FACP).
• Five (5) individual power-limited Class 2 outputs (auto-resettable).
• Filtered and electronically regulated outputs.
• Thermal and short circuit protection with auto reset.
• Overload protection.
• Output relay energizes when unit is triggered (form "C" contact rated 1A @ 28VDC).
• Supervision:
• AC Fail
• Battery Fail and Battery Presence
• Built-in charger for sealed lead acid or gel type batteries
• Instantaneous transfer to stand-by batteries
• Power and input trigger LEDs.
• DC output LED indicator.
• LEDs indicate condition of power outputs.
• UL Listed in the U.S. and Canada.
• CSFM Approved.
• Lifetime Warranty / Made in the U.S.A.
• All units are available in grey or red enclosure.

Resources

• Cut Sheet
• 2016-2017 Altronix Product Catalog
• 2022 Altronix Price Book
• 2020 Altronix Product Guide
• Altronix NetWay Spectrum Series Catalog
• Altronix Featured IP & Power Products
• AL175UL Instructions
• AL175ULX Instructions
• Cut Sheet